Contacteer ons Promoties Français

Hoge drukslangen 700 tot 2500 bar

FEATURES

These hoses are suitable for all hydraulic applications and consist of 2, 4, or 6 steel wire spirals depending on the operating pressure. They have an extremely high tensile strength.
Their outer cover in polyurethane (700-1000 bar) or polyamide (1800 and 2500 bar) provides excellent abrasion protection, whereas minimal expansion during operation guarantees excellent efficiency.

 
Max Pressure: 700 - 2500 bar
Internal Diameter: 4,8 - 6,3 mm

Selection chart for 700-1000 bar hoses

Model Max. Working
Pressure
Fitting thread Length Coupling Nipple Min. burst pressure Safety factor
@ 700 bar
Safety factor
@ 1000 bar
Internal Diameter Minimum bending
radius
Oil Volume Weight
bar         bar     mm mm cm3/m Kg/m
SN10 1000 3/8" NPT - 3/8" NPT male 10 = 1 m
20 = 1,8 m
30 = 3 m
etc.
- - 2800 4 2,8 6,3 70 31,7 0,32
SN10M 700  K73M
SQ10  1000 1/4" NPT - 1/4" NPT male -
SQ10M  700 K71M

Selection chart for 1800 bar - 2500 bar hoses

Model Max. Working
Pressure
Fitting thread Length Coupling Nipple Min. burst pressure Safety factor
Internal Diameter Minimum bending
radius
Oil Volume Weight
bar         bar   mm mm cm3/m Kg
SM10 1800 1/4" BSP - 1/4" BSP Swivel female 10 = 1 m
20 = 2 m
30 = 3 m
etc.
- - 4500 2,5 4,8 130 17,8 0,28
SM10P RN32
SH10 2500 - 6250 175 0,41
SH10P RN51
 
  • Bolt tensioners hoses: SN#FT (with K13X coupler).
  • Torque wrenches hoses: SQ##FM(male coupler on one side and female on the other)

The maximum operating pressure of the pump-hosecoupling system is the working pressure of the lowest rated part.

The oil volume required to fill the hoses needs to be taken into account when selecting the pump model.


Metalced industrie
Mechelsesteenweg,307
2550 Kontich
Tel  03/457 78 78
Fax 03/457 09 68
Info@metalced.be
BTW BE 0404.036.573